manualshive.com logo in svg

EUROCOM Sky X6, User Manual

The EUROCOM Sky X6, a high-performance laptop, offers unparalleled gaming and multitasking capabilities. Unlock the full potential of this remarkable device with the comprehensive User Manual, available for free download at 88.208.23.73:8080. Explore its features, master its functions, and unleash the power of the EUROCOM Sky X6.

Share
Download
background image

Modules

Fingerprint Reader Module 6 - 37

6

Fingerprint Module Configuration

1.

Click the 

Settings

 item in the Start Menu and then click 

Accounts

 and click 

Sign-

in options

.

2.

You will need to add a 

Windows

 password (click 

Add

 under 

Password

).

3.

After you have added the password you will need to also add a 

PIN

.

4.

Under 

Windows Hello 

click

 Set up 

under

 Fingerprint

.

5.

The wizard will then guide you through the set up process to scan your fingerprints.

Figure 6 - 24

Accounts - Sign-in 

options 

(Add Fingerprint)

Summary of Contents for Sky X6

































































































































































































































































































































Reviews:

No comments

Related manuals for Sky X6

Medion AKOYA C15x Instruction Manual preview
AKOYA C15x
Brand: Medion Pages: 73

Brands by name

Popular brands

Load more brands