Technical Data
The data set forth in this document are general in nature and for information purposes only.
For performance data and operating limitations,reference must be made to the approved flight manual and all appropriate documents.
350 B3 08.101.01 E
26
This document is the property of
EUROCOPTER
®
; no part of it shall be reproduced or transmitted without the express prior written authorization of
EUROCOPTER
®
and its contents shall not be disclosed
. ©
EUROCOPTER-2008
5-2 List of optional equipment
This chapter includes all the optional equipment that can be selected to customize the
AS350 B3
helicopter.
Please take note that there can be incompatibilities between optional equipments. Any configuration made
by using this list of optional equipment should be made with the assistance of the latest issue of the Table of
Constraints, or validated by a
EUROCOPTER
sales representative.
Note : value of the weight breakdown is given for information and shall not be considered as contractual.
General equipment
Document
reference
Commercial
reference
Name
kg lb
05-01022-A
05-01022-00-CI
Kit to increase Internal Gross Weight to 2,370 kg (5,225 lb)
1
24.0 52.9
05-01027-A
05-01027-00-CI
Russian certification kit
7.0
15.4
05-02004-A
05-02004-00-CI
Extra charge for customized external paint - level 1
2
-
3
4.0 8.8
05-02005-A
05-02005-00-CI
Extra charge for customized external paint - level 2
2
-
4
4.0 8.8
05-02006-A
05-02006-00-CI
Extra charge for customized external paint, apart from levels
1 and 2
2
-
5
On request
05-03002-A
05-03002-00-CI
First aid kit
3.0 6.6
05-21003-A
05-21003-00-CI
Wire strike protection system
6
7.0 15.4
05-23003-A
05-23003-00-CI
Engine flushing device without removal of cowlings
0.8 1.8
05-24003-A
05-24003-00-CI
High visibility main rotor blades
0.1 0.2
05-24004-A
05-24004-00-CI
Tail rotor arch
1.5 3.3
05-25006-A
05-25006-00-CI
Reinforced sand-erosion protection strip on main rotor blades
0.3 0.7
05-25007-A
05-25007-00-CI
Reinforced sand-erosion protection strip on tail rotor blades
0.1 0.2
05-25025-A
05-25025-00-CI
Enhanced Engine Air Particle Separator
7
7.3
16.1
05-25029-A
05-25029-00-CI
Heavy duty blade pins
8
0.0 0.0
05-31003-A
05-31003-00-CI
Tinted window for standard and optional configuration
0.0 0.0
05-31004-A
05-31004-01-CI
Bulged window on copilot front door (LH side)
9
-0.5 -1.1
05-31004-A
05-31004-02-CI
Bulged window on right rear door
0.1 0.2
05-31004-A
05-31004-03-CI
Bulged window on left rear door
0.1 0.2
05-31007-A
05-31007-00-CI
Large cabin floor window (right side)
10
3.0 6.6
05-32001-A
05-32001-00-CI
Pilot's windshield wiper
2.6 5.7
05-32003-A
05-32003-00-CI
Copilot's windshield wiper
2.6 5.7
1
This option includes the option “Dual hydraulic circuit”.
2
Paint scheme must be approved at the latest 3 months before the delivery of the helicopter.
3
Paint scheme comprising a basic shade and 2 or 3 additional shades, with straight separation lines, apart from
standard paint schemes.
4
Paint scheme comprising a basic shade and up to 3 additional shades, with separation lines not straight or tangled
up, with graduated shades or complicated emblem or logo to be hand-painted.
5
Sophisticated paint scheme with numerous shades, complex graduated shades, or complicated emblem or logo.
6
Structural reinforcements are included in standard aircraft.
7
The sand-prevention filter lifts the flight limitations in falling snow conditions.
8
Recommended for operations in sandy and abrasive conditions
9
Removes the sliding window on copilot front door.
10
Removes the standard pilot map case.
