FLIGHT MANUAL BK 117 C-2
NAVIGATION MANAGEMENT SYSTEM - CMA–9000
9.2-51 – 12
EASA APPROVED
Rev. 0
4.2
FUNCTIONAL TEST
(
RADIO SELFTEST USING “TEST ALL” FUNCTION (ONLY AVAILABLE ON
GROUND))
1. RADIO pb
– Press
2. NEXT pb
– Press twice, to access RADIO
SELFTEST page 3/3
3. LSK6R pb
– Press twice, check
STARTED
appears; indicates that radio
tests have been started
If tests were successful:
4. NMS Screen
–
PASS
message appears
If tests were not successful:
4. NMS Screen
–
FAIL
(when radio replied failure)
or
TIMEOUT
(when radio did not
reply at all) appears in conjunc-
tion with the name of the radio.
– Check the radio then continue
with step 3.
5. LSK6R pb (on both NMS)
– Press, check
READY
appears,
indicates that the radio tests are
switched off
NOTE
D
During the test the tuning of the radios is inhibited.
D
READY
is displayed by default when RADIO TEST page 3/4 was accessed
and after radio tests left in
CONFIRM
status.
4.3
PRE–TAKEOFF CHECK
CAUTION
ON CMA–9000, THE TRANSPONDER DOES NOT ACTIVATE AUTOMATICALLY
WHEN THE COLLECTIVE IS UNLOCKED. IT MUST BE ACTIVATED MANUALLY.
1. RADIO page
– Select
2. RADIO DETAILS (LSK 6R)
– Select
3. ATC page
– Select
4. STANDBY/ACTIVE
– Select
ACTIVE
5. RADIO page
– Select
6. ATC labels
– Check
STBY
disappeared
NOTE
On ground SSR/Transponder is always set to standby even when NMS indi-
cates
ACT
or
ACTIVE
.
