NAVIGATION MANAGEMENT SYSTEM - CMA–9000
FLIGHT MANUAL BK 117 C-2
9.2-51 – 17
EASA APPROVED
Rev. 1
4.4.9
VOR – Autotuning
After NMS start up VOR tuning starts as default in MANUAL tuning mode. VOR–autotun-
ing feature must be manually activated.
Assure the NMS scratchpad is empty. If not, use the CLR key as often as necessary to
delete all characters in the scratchpad. Pressing the CLR key for more than 2 seconds
will delete all scratchpad entries at once.
To manually activate VOR–autotuning mode perform the following:
-
RADIO key as often as to access RADIO page 1/4 page – Press
-
CLR key
– Press
-
LSK adjacent to NAV radio to be set into VOR–autotuning mode – Press
-
Below NAV radio
– Check indication,
”AUTO” is indicated
in inverse video white
NOTE
If no valid reply of a VOR–station is received by the NMS, a default frequency of
108.00 is displayed.
To manually de–activate VOR–autotuning mode perform the following:
-
RADIO key as often as to access RADIO page 1/4 page – Press
-
CLR key
– Press
-
LSK adjacent to NAV radio to be set into VOR–autotuning mode – Press
-
Below NAV radio
– Check indication,
”AUTO” is deleted
