16
AVAILABLE SPARE PARTS
Permanent filter - 1 piece
TECHNICAL SPECIFICATIONS
Voltage:
230V /50 Hz
Motor power:
450W
Cable length:
6 mt
Attachments:
Upholstery nozzle
Crevice nozzle
Flexible hose
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE REASON
POSSIBLE SOLUTION
Hand vacuum will not oper-
ate
1 Power cord not firmly plugged
into outlet.
2 No power in wall outlet.
3 Appliance needs maintenance
1 Plug unit firmly into outlet.
2 Check fuse or breaker.
3 Take it to an authorized service
center.
Hand vacuum will not pick-up
or suction power is weak
1 Dust cup is full.
2 Unit clogged.
3 Dust cup filter needs cleaning.
1 Empty dust cup filter.
2 Turn unit off and unplug from wall
outlet. Remove dust cup filter and
check for object(s) in air duct or
hose. If so, remove them.
3 Clean or replace dust cup filter.
(see pag. 5).
Dust escaping fromhand
vacuum
1 Dust cup filter is full.
2 Dust cup filter is not correctly
installed.
3 Puncture / hole in dust cup filter.
1 Clean or replace dust cup filter.
2 Review dust cup filter instruc-
tions. (see par. CHANGING &
CLEANING THE DUST CUP
FILTER).
3 Replace dust cup filter (see fig.
2).
Hose or brushes will not
pick up
1 Hose clogged.
2 Dust cup filter is full.
1 Remove hose and/or brushes.
2 Remove obstruction from hose.
3 Empty and clean dust cup filter.
