Crisis EVC Network Expander Installation Guide
Page 8
www.eurofyre.co.uk
3.1 Unpacking
Remove the Crisis EVC Network Expander from its packing, and check the contents against the following list:
•
Crisis EVC Network Expander
•
Installation Guide
•
Accessory Pack:
1 x 2.5mm AF Hex Key
8 x 10k End of Line (EOL) Resistors
Installation Guide
Figure 1: Crisis EVC Network Expander Front
Use the 2.5mm AF Hex Key supplied to open the right-hand front cover.
Verify the following items are present:
•
4 x Line Cards
•
1 x 3-way Mains Connector
•
1 x 2-way Fault Connector
•
1 x 2-way In Use Connector
•
1 x 2-way Enable Connector
•
4 x 2-way Network Connectors
•
1 x Battery Lead
If there are any items missing, please contact your supplier or Eurofyre Limited, quoting the unit serial number and the name on the packing list
enclosed, so the situation can be rectified.