ProFyre C8 User & Maintenance Guide + Log Book
Page 14
www.eurofyre.co.uk
Earth Fault
The Earth Fault light is constant when the panel detects an earth fault (short circuit to earth) on the wiring to any part of the control panel.
Figure 8: Earth fault indications
Sounder Fault
The Sounder status light flashes when there is a wiring fault on the Sounder Circuits. Depending on where the fault has occurred, one or all of
the Alarm Sounders may no longer be operative. If the fault is a short circuit fault, then the S/C LED will also be flashing.
Figure 9: Sounder fault indications
7.2 What to do if a Fault Condition Occurs
If a fault occurs, the responsible person should:
7.
Enter the access code and press
to enable controls and press
to silence the fault buzzer.
8.
Write down the fault(s) in the Log Book at the back of this manual. Take appropriate action to correct the fault (usually by contacting the
service engineer).
On the ProFyre C8 panel, the fault indications (except system fault) are non latching. That is, when the fault has been cleared, the fault indication
will turn off. When all faults have been cleared, the panel will return to its quiescent (normal) condition.
When a fault has been rectified the indicator light for that fault is automatically turned off. If all faults are cleared, the General Fault light will go out
and the panel’s internal sounder will be silent (if not already muted).
Summary of Contents for ProFyre C8
Page 2: ...This page is intentionally left blank ...
Page 30: ...Back Page ...