51116120_V_1_1.DOC
22/41
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuseholder on the device underside with a fitting screwdriver from the housing (anti-
clockwise).
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
150 W
Base Dimensions (LxWxH):
480 x 480 x 230 mm
Weight:
11kg
Maximum ambient temperature t
a
:
45° C
Maximum housing temperature t
B
(steady state):
60° C
Fuse:
F 1 A, 250 V
Accessories:
No.
Spare cone 2m white
51116150
Spare cone 2m red
51116151
Spare cone 2m blue
51116152
Spare cone 3m white
51116160
Spare cone 3m red
51116161
Spare cone 3m blue
51116162
Spare cylinder 2m white
51116170
Spare cylinder 2m red
51116171
Spare cylinder 2m blue
51116172
Spare cylinder 3m white
51116180
Spare cylinder 3m red
51116181
Spare cylinder 3m blue
51116182
Please note: Every information is subject to change without prior notice. 03.02.2005 ©
