00081787.DOCX, Version 1.0
29/34
EUROLITE IR-7 remote control
1
The device must be activated for remote control. For this, set menu item SET
to On.
2
When actuating a button, always hold the remote control in the direction of the
sensor. There must be visual connection between the remote control and the
sensor.
3
The remote control is supplied with a battery inserted. An insulating foil
between the battery and the battery contacts prevents the battery from being
discharged during storage. Prior to the first operation remove the foil from the
battery support on the rear side of the remote control. Otherwise operation of
the remote control is not possible.
4
If the range of the remote control decreases (10
meters as a maximum), replace the battery. For this
purpose, on the rear side of the remote control press
the small bar with the groove to the right and at the
same time remove the battery support. For
operation, one 3 V button cell type CR 2025 is required. When inserting, pay
attention that the positive pole of the button cell shows upwards in the support.
CAUTION!
Danger of explosion when battery is replaced improperly. Only replace by the same type.
Please dispose of old and used batteries properly. Batteries are hazardous waste and should
not be disposed of with regular domestic waste!
Button
Function
Setting options
BLACKOUT
All LEDs on/off
-
AUTO
Internal programs
Program 1-17 with
+/–
Running speed with
SPEED
and
+/–
Fade speed with
FADE
and
+/–
Strobe effect with
STROBE
and
+/–
SOUND
Sound-controlled mode
Microphone sensitivity with
SENSITIVITY
and
+/–
MANUAL
Manual color selection
Amber brightness with
A
and
+/-
Red brightness with
R
and
+/-
Green brightness with
G
and
+/-
Blue brightness with
B
and
+/-
0 ~ 9
Static colors
0
= white (RGBA),
1
= red,
2
= amber,
3
= yellow,
4
= green,
5
=
cyan,
6
= blue,
7
= magenta,
8
= orange, and
9
= amber
