00053960.DOC, Version 1.0
16/16
Please refer to the instructions under "Installing/Replacing the lamps".
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
110 W
Suitable lamp:
3 x GU-10, 230 V/35 W
Maximum ambient temperature T
a
:
45° C
Maximum housing temperature T
C
(steady state):
70° C
Min. distance from flammable surfaces:
0.5 m
Min. distance to lighted object:
0.5 m
Fuse:
F 1 A, 250 V
Base dimensions (DxH):
263 x 118 mm
Total height:
1070 mm
Weight:
1.7 kg
Accessories:
No.
OMNILUX GU-10 230V/35W 1500h + C
88541505
OMNILUX GU-10 230V/35W 1500h blue
88541506
OMNILUX GU-10 230V/35W 1500h red
88541507
OMNILUX GU-10 230V/35W 1500h green
88541508
OMNILUX GU-10 230V/35W 1500h yellow
88541509
OMNILUX GU-10 230V/35W 1500h violet
88541510
OMNILUX GU-10 230V/35W 1500h orange
88541511
Please note: Every information is subject to change without prior notice. 14.11.2012 ©
