00058952.DOC, Version 1.2
22/26
Stand Alone-Mode
Chaser
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
the LED Bar 2 RGBA 252/10, you can select up to 13 different chasers.
Selecting a chaser
Press the MODE button to select the internal program mode. Select the desired chaser (01 – 13) via the UP
or DOWN buttons (see following graphic).
Press the ENTER button to select speed and flash settings, respectively. You can select the desired values
via the UP or DOWN buttons.
Speed from 00 to 99, increasing.
Flash from 00 to 99, increasing.
Please press the ENTER button to confirm and to exit the STAND ALONE Mode.
01 = Dimming
*
R00 G00 B00 A00 F00
02 = Color jump
Speed 00
Flash 00
03 = Color fade
Speed 00
Flash 00
04 = Dreaming
Speed 00
Flash 00
05 = Color flow
Speed 00
Flash 00
06 = Overlap flow
Speed 00
Flash 00
07 = Color chase
Speed 00
Flash 00
08 = Multi color
Speed 00
Flash 00
09 = Fade flow
Speed 00
Flash 00
10 = Two flow
Speed 00
Flash 00
11 = One way
Speed 00
Flash 00
12 = Two way
Speed 00
Flash 00
13 = Two color
Speed 00
Flash 00
* = Not a Chaser, rather a possibility to individually set the color intensity of the singular colors. Flash setting
is valid for all colors equally, from 00 to 99, increasing.
Auto Mode
In Auto Mode the chasers are called up automatically in a continuous loop.
Press the MODE button to select the AUTO mode.
Press the ENTER button to select the desired frequency of the loops.
The desired frequency of the loops (Frequency = FQN 01-99) can be selected via the UP or DOWN buttons.
Please press the ENTER button to confirm and to exit the AUTO Mode.
DMX Mode
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED Bar 2 RGBA 252/10 will respond to the controller.
