00054564, Version 1.3
22/27
Connection with the mains
Connect the device to the mains with the enclosed power supply cable.
The occupation of the connection-cables is as follows:
Cable Pin
International
Brown Live
L
Blue Neutral
N
Yellow/Green Earth
The earth has to be connected!
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.
On the rear panel, there is an IEC socket (Power Out). Connect the output with the mains input of the next
fixture until all fixtures are connected.
Please note:
A maximum of 8 devices may be linked together. After every 8 devices, the fixtures must have
a renewed connection with the power mains.
OPERATION
After you connected the spot to the mains, the device starts running.
The LED display lights up and you can choose the desired mode via the buttons MODE, SET UP, UP and
DOWN.
See following graphic.
MODE
SET UP
UP / DOWN
FUNCTION
DIMMER
Red
~
Adjust the intensity of the red color
Green
~
Adjust the intensity of the green color
Blue
~
Adjust the intensity of the blue color
Flash speed,
increasing
~
is off,
is slowest,
is fastest
SOUND
Program selection
~
Select the internal sound-controlled program
Sensitivity
selection,
increasing
~
is lowest level,
is highest level
AUTO
Fading colors
~
Select the internal fading color program
Switching colors
~
Select the internal switching color program
Speed set
~
Adjust the speed of the internal programs
STATIC
COLOR
SELECT
Color select
~
Select from 8 static colors: 0-black, 1-red, 2-green,
3-blue, 4-cyan, 5-yellow, 6-purple, 7-white
Flash speed,
increasing
~
is off,
is slowest,
is fastest
OTHER
Display:
on/off
LED digital display always on
LED digital display off
Display:
LED digital display normal
