background image

14

USER MANUAL

TS-3 DMX-Scanner

For your own safety, please read this user manual carefully before you initial start-up.

Every person involved with the installation, operation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manual

INTRODUCTION

Thank you for having chosen a EUROLITE TS-3. You will see you have acquired a powerful and versatile
device.

Unpack your TS-3.

Before you initial start-up, please make sure that there is no damage caused by transportation. Should there
be any, consult your dealer and do not use the device.

SAFETY INSTRUCTIONS

CAUTION!

Be careful with your operations. With a dangerous voltage you can suffer a dangerous

electric shock when touching the wires!

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.

Never let the power-cord come into contact with other cables! Handle the power-cord and all connections
with the mains with particular caution!

Summary of Contents for TS-3 DMX-Scanner










Reviews: