EN
97
Heat setting
Safety switch o
ff
after
1-2
6 Hours
3-4
5 Hours
5
4 Hours
6-9
1.5 Hours
Child Lock
After switching on the appliance, the
child lock function can be activated. To
activate the child lock, simultaneously
press the increase heat setting button
and decrease heat setting button
and then press the increase heat setting
key
again. “
L
” indicating LOCKED will
appear on all heater displays and the
controls can not be used. (If a cooking
zone is in the hot condition, “
L
” and “
H
”
will display alternately).
The hob will remain in a locked condition
until it is unlocked, even if the appliance
has been switched o
ff
and on.
To deactivate the child lock, fi rst switch
on the hob. Simultaneously press the
increase heat setting button
and
decrease heat setting button
and then
press the decrease heat setting button
again. “
L
” will no longer be displayed
and the hob will switch o
ff
.
Key Lock
The key lock function is used to set
“safe mode” on the appliance during
operation. It will not be possible to make
any adjustments by pressing the buttons
(for example heat settings). It will only
be possible to switch the appliance o
ff
.
The lock function is active if the key lock
button is pressed for at least 2 seconds.
This operation is acknowledged by
a buzzer. After successful operation,
the key lock indicator will fl ash and the
heater will be locked.
Timer Function
The timer function is available in two
versions, as follow.
Minute Minder Timer (1 - 99 min.)
The minute minder timer can be operated
if the cooking zones are switched o
ff
.
The timer display will show “
00
” with a
blinking dot.
Press
to increase the time or press
to decrease the time. The range is
between 0 and 99 minutes. If there is no
adjustment to the displayed time within
10 seconds, the minute minder timer will
be set and the blinking dot will disappear.
Once the timer is set, it begins to count
down.
When the timer reaches zero, a signal
will sound and the timer display will blink.
The sound signal will stop automatically
after 2 minutes and/or by pressing any
button.
at any time by using the timer setting
button
and/or the decrease timer
button
. Switching o
ff
the hob by
touching
at any time will also switch
o
ff
the minute minder timer.
Cooking Zone Timer (1 - 99 min.)
When the hob is switched on, an
independent timer can be programmed
for each cooking zone.
Select a cooking zone, then select the
temperature setting and, fi nally, activate
the timer setting button
, the timer can
be programmed to switch o
ff
a cooking
zone. Four LEDs are arranged around
the timer that indicate which cooking
zone the timer has been set for.
10 seconds after the last operation, the
timer display will change to the timer that
will run out next (in cases where a timer
is set for more than one cooking zone).
