EN
99
In the image above, the front right heater
display is indicating the frying function.
Keep-Warm Function
This function allows the temperature of-
food to be kept at around 50°C. To activate
the keep-warm function, press the heat-
er selection button four times. When the
keep-warm function has been activated,
the corresponding display will show “
u
”.
The above image shows the front right
heater display indicating the keep-warm
function.
Chocolate-Melting Function
This function melts chocolate or similar
foods at around 40°C. To activate the choc-
olate-melting function, press the heater
selection button fi ve times. When the choc-
olate-melting function has been activated,
the corresponding display will show “
c
”.
In the image above, the front right heater
display is indicating the chocolate-
melting function.
Performance and time may vary
according to the quantity of food in
the pan and the quality of the pan. 1.5
litres of water or 0.5 litres of oil gives the
best cooking performance with these
functions.
Error Codes
If there is an error, an error code will be shown on the
heater displays.
E1
Cooling Fan is disabled. Call an author-
ised service agent.
E3
Supply voltage is other than the rated
values. Switch the hob o
ff
by pressing
, wait until “
H
” disappears for all
zones, switch the hob on by pressing
and continue to use. Ifthe same error is
displayed again, call an authorised service
agent.
E4
Supply frequency is di
ff
erent from the
rated values. Switch the hob o
ff
by press-
ing
, wait until “
H
” disappears from all
zones, switch the hob on by pressing
and continue to use. If the same error is
displayed again, switch the plug for the
appliance o
ff
and on. Switch the hob on
by pressing
and continue to use. If
the same error is displayed again, call an
authorised service agent.
E5
Internal temperature of the hob is too
high, switch the hob o
ff
by pressing
and let the heaters cool down.
E6
Communication error between the touch
control and heater. Call an authorised
service agent.
E7
Coil temperature sensor is disabled. Call
an authorized service agent.
E8
Cooler temperature sensor is disabled.
Call an authorized service agent.
EA
Large Coil Saturation Error. Switch the
hob o
ff
by pressing on/o
ff
button, switch
the hob on by pressing on/o
ff
button
and continue to use. If the same error is
displayed again, call an authorised service
agent.