EN
40
• Slider controls (Fig.8.2), the sym-
bols are shown below:
This hood is equipped with a
mi-
croswitch.
If the telescopic trolley is closed with the
speed set i.e. at 2 and the light are on,
once it is reopened, the hood reactivates
at the same working speed at which it
was switched o
ff
.
A
= FIRST SPEED O
ff
/On Switch
B
= SECOND SPEED Switch
C
= THIRD SPEED Switch.
D
= Light On/O
ff
Switch
• Commands (Fig.9):
Push-button A
= On/o
ff
lights switch.
Push-button B
= On/o
ff
cooker hood
switch. The appliance switches on at
speed level 1, If the cooker hood is on
depress the push-button for 2 sec. to
switch o
ff
the cooker hood. If the cook-
er hood is at speed level 1 it will not be
necessary to depress the push-button to
switch the cooker hood o
ff
. Decreases
the motor speed.
Display C
= Indicates the motor speed
level selected and activates the timer.
Push-button D
= Switches on the cook-
er hood. Increases the motor speed.
Touching the key at 3rd speed, the in-
tensive function runs for 10’, then the
appliance go back to work at the original
speed. During this function the display
blinks.
Key E
= The Timer times the functions
on activation for 15 minutes, after which
they are switched o
ff
. The Timer is de-
activated by re-pressing
Key E
. When
the Timer is activated the decimal point
must
fl
ash on the display. The Timer can-
not be activated if the intensive speed is
functioning.
The
“clean air”
function is activated by
pressing key E for 2 seconds when the
appliance is switched o
ff
. This switches
the motor on for 10 minutes every hour
at the
fi
rst speed. During functioning a
rotary movement of the peripheral seg-
ments must be visualised on the display.
When this time has passed the motor
switches o
ff
and the
fi
xed letter
“C”
must be visualised on the display until
the motor re-starts after 50 minutes for
another 10 minutes and so on. Press
any key apart from the light keys to re-
turn to normal functioning. Press key
E
to deactivate the function.
• Anti-grease/active charcoal
fi
lters
saturation:
– When display item
C
fl
ashes, at a
speed where it alternates with the let-
ter
F
(e.g.
1
and
F
), the anti-grease
fi
lters must be washed.
– When display item
C
fl
ashes, at a
speed where it alternates with the let-
ter
A
(e.g.
1
and
A
), the active carbon
fi
lters must be replaced or washed
depending on the type of
fi
lter.
After the clean
fi
lter has been positioned
correctly, the electronic memory must be
reset by pressing button
A
for approxi-
mately
5 seconds
, until the indication F
or A shown on the display
C
stops
fl
ash-
ing.
• Commands luminous (Fig.10) the
key symbols are explained below:
A
= LIGHT
B
= OFF
C
= SPEED I
