8
REPLACING THE LIGHT
•
You cannot replaced the light bulbs, the entire light module has to be replaced.
•
When changing the light modules, the contacts are live.
•
Before changing the light module(s), unplug the appliance from the mains or switch off the circuit breaker in the
fuse box.
•
Remove the grease filter .
•
Disconnect the terminal of LED light.
•
Press LED light on the back of the front plate, take the LED light out.
•
Replace the lamp(commercially available LED lamp (max.1.5w).
Reinstall LED light module
•
Press LED light on the front of front plate, install the LED light on the front plate.
•
Connect the terminal of LED light and light leads.
•
Reinstall the grease filter.
Max Power Voltage
Picture
Lamp Cap ILCOS D code
1.5W
DC 12 V
——
DSS-1.5-S-33.2
/120
Lamp type
Square / Di
mesion:
33.2mm x 120mm
