• Fitting: Wood & steel with cream fabric shade.
• Lamp type: Excluding: 1 X E27 GLS maximum 40W.
• Voltage: 220V - 240V ~ 50Hz.
• Protection against electric shock: Class 2. Does not require earthing.
• IP Rating: IP20. Dust Protected. Protected against solid foreign objects of 12.5mm Ø and
greater. Not protected against water.
• Commercial / domestic use
• Not suitable for outdoor use.
• Not for use in areas exposed to moisture EG. Bathrooms or Kitchens
• Maximum Ambient temperature range: 20ºC - 40ºC.
• Dimensions: (H) 1620mm X (Ø) 255mm.
• Inline foot switch.
• Before installation always ensure the power supply is turned off.
• Unpack and place on a stable surface.
1. Attach the fabric shade by fastening into position with the ring.
2. Insert the E27 lamps.
3. Turn the power supply on.
4. Turn lamp ON/OFF by stepping on the foot switch.
FL110 - attachments:
If the external flexible cable or cord of this luminaire is damaged, it should be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order to
avoid a hazard.
To ensure that you get maximum longevity and maximum use out of your luminaire, please
observe the following safety instructions.
Electrical products can cause death, injury, or damage to property.
Installation of the luminaire must be carried out by a qualified electrician, in accordance with
SANS 10142. On completion of installation, ensure that the Certificate of Compliance is
updated.
• Before connecting the luminaire, ensure that voltage indicated on the rating label
corresponds with the mains voltage in your home.
• When changing the lamp, ensure that the power is turned off.
• Ensure that the correct lamp type and wattage is fitted.
• This luminaire is checked in full for conformity to the quality standards and safety
requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons,
caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional
electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, I.E. Using silicon sealers or incorrect cabling, will invalidate
your warranty.
• When the protection glass is damaged, it should be replaced immediately. The luminaire
must not be used without the protection glass.
• Please check whether the connection of the power cord is safe and reliable before
installation.
• If your mains wiring differs in any way from diagram luminaire, consult a qualified
electrician.
• Always ensure that the mains supply voltage is correct.
• Always replace the lamp with one of an identical rating and wattage.
• Choking hazard: May contain small parts. Keep away from children.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
• Ensure that the fitting does not come in contact with corrosive chemicals, etc.
• Use a soft white cloth to clean.
• Do not insert your fingers or any part of your body into the electrical contact and sockets of
this product whilst it is connected to the electrical supply.
• Item may vary slightly from the picture on the carton.
• Coastal humidity may effect the longevity of the luminaire.
• Outdoor luminaires must be cleaned to prevent rust occurring.
