32
32
The day indicator will now flash (SUN). Choose the days when the stove
must operate (e.g., from Monday to Friday) by pr next to the days
you have selected and pressing - next to the days that you don't want to
select. Use to arrows to move to the next day. Press again on the TIMER
SET button to choose the days and confirm.
The hours indication will now flash and you will see ON on the display. By
selecting the + and - buttons, you choose the hours when you want the stove
to operate. Confirm by pressing the TIMER SET button.
The minutes indicator will now flash. By pressing the + and - buttons, you
select the time period (in intervals of 10 minutes) for the stove to operate.
Confirm by pressing on the DAY/TIME button. The starting time is now set.
The hour indicator is flashing again to order for you to set at which time the
operation must end. OFF appears on the display. Select the time in the same
way you selected the operating time and confirm by using the TIMER SET
button.
Now the temperature setting starts to flash. Using the + or - buttons, select
the desired temperature and confirm by using the TIMER SET button.
You initial timer setting is now set.
To generate a second setting, press once again on the TIMER SET button.
While 01 is flashing, press on the + button: 02 will appear. Confirm this using
the TIMER SET button and subsequently set new days, hours and minutes
as described above.
You can generate maximum 10 time settings. Prevent the setting from
containing any conflicting or overlapping orders.
To operate the stove according to the timer settings, do the following:
Switch on the stove using the ON/OFF button.
Press the 900W or 1800W button to set the desired output. If the desired
temperature is above the ambient temperature, the stove will begin to heat (
900W,1800W). The corresponding light will light up on the display (900W-1
star,1800W-2 stars).
If you press the IC button (automatic choice of output), the stove possible will
start to heat the room 20 minutes before the set time. After 20 minutes the
stove will automatically choose the most suitable output.The corresponding
light will light up on the display (IC-AUTO).
By pressing the ‘dimmer’ button (there are 5 positions), you can intensity or
decrease the flame effect of the stove.
Now activate the timer by pressing on the TIMER ON/OFF button. The
operating-timer light will light up and the timer set 01 will flash. If you press
OK now, then the heater will completely process all the settings once until
Sunday evening 24:00. If you want to repeat the set weekly schedule, press
once again on the TIMER ON/OFF button. A symbol ][ will appear on the
display. If you now press OK, the timer setting will be repeated weekly.