39
You switch off the stove by pressing the ON/OFF button. The temperature level
that you set will remain. However, if you switch on the stove once again, you
will have to reset the output.
If you want to switch off the stove for a longer period, then also set the main
switch on O (OFF). The set temperature will now be erased. Finally remove the
plug from the socket.
If you do not enter any orders for approx. 15 seconds, the display will turn off.
Pressing any random button will reactivate the display.
Set open window detector:
Make sure the unit is switched on and heating up.
Press
; the display shows the corresponding icon
and the temperature
(°C). You can change this using the plus and minus buttons. When open
window detection is switched on, the unit will switch off if the temperature in
the room drops quickly and go to standby. In this case, you can turn the unit on
again using the on/off button.
Press the
button again to turn the open window detection off. The icon
disappears from the display and the unit returns to its previous settings.
If the heater is set to come on in a weekly programme and you turn the open
window detection on, this will only work while the unit is switched on in the
weekly programme.
Timer
The stove has a built-in weekly timer, which allows you to set a weekly schedule
for switching on and off. You must first set the date and time; if you don't
do that, then the stove assumes that it is scheduled for Sunday at 00.00!
Press the ON/OFF button to switch on the stove.
Press on the DATE/TIME button; the day indicator will light up. Select the
arrows Λ and V for the current day and confirm this by pressing the
DATE/TIME button again (Sunday, Monday, etc.)
The hour indication will now flash. By pressing on the + and - buttons, you
select the current hour. Reconfirm by pressing on the DATE/TIME button.
The minutes indicator will now flash. By pressing on the + and - buttons,
you select the precise time. Confirm by pressing on the DATE/TIME button.
Day and time are now set.
To set the weekly timer, take the following steps:
Ensure that the stove is switched on with the ON/OFF button.
Press on the PROG SET button. The indication P1 on the display starts to
flash, indicating that you have selected the first timer setting (you can select
9 timer settings). Confirm this by pressing once again on the PROG SET
button.
The day indicator will now flash (SUN). Choose the days when the stove
must operate (e.g., from Monday to Friday) by pr next to the days
you have selected and pressing - next to the days that you don't want to
Summary of Contents for Malmo 363463
Page 2: ...2 ...
Page 107: ...107 ...
Page 108: ...108 EUROM Kokosstraat 20 8281 JC Genemuiden info eurom nl www eurom nl ...
