40
select. Use to arrows to move to the next day. Press again on the PROG SET
button to choose the days and confirm.
The hours indication will now flash and you will see ON on the display. By
selecting the + and - buttons, you choose the hours when you want the
stove to operate. Confirm by pressing the PROG SET button.
The minutes indicator will now flash. By pressing the + and - buttons, you
select the time period (in intervals of 10 minutes) for the stove to operate.
Confirm by pressing on the PROG SET button. The starting time is now set.
The hour indicator is flashing again to order for you to set at which time the
operation must end. OFF appears on the display. Select the time in the same
way you selected the operating time and confirm by using the PROG SET
button.
Now the temperature setting starts to flash. Using the + or - buttons, select
the desired temperature and confirm by using the PROG SET button.
You initial timer setting is now set.
To generate a second setting, press once again on the PROG SET button.
While P1 is flashing, press on the + button: P2 will appear. Confirm this
using the PROG SET button and subsequently set new days, hours and
minutes as described above.
You can generate maximum 9 time settings. Prevent the setting from
containing any conflicting or overlapping orders.
To operate the stove according to the timer settings, do the following:
Switch on the stove using the ON/OFF button.
Press the 1000W or 2000W button to set the desired output. If the desired
temperature is above the ambient temperature, the stove will begin to heat
(1000W, 2000W). The corresponding light will light up on the display
(1000W-1 star, 2000W-2 stars).
Now activate the timer operation by pressing the TIMER ON / OFF button.
The 'timer in operation' lamp lights up. If you now press OK, the fire will
complete all settings on a weekly basis.
Attention! All timer settings (maximum 10 per week) will be processed
completely one by one. Therefore, make sure that they do not contradict
each other!
If you wish, you can also readjust the thermostat, output and dimmer while
the timer is working.
You stop the operation of the timer by pressing on the TIMER ON/OFF
button. The stove will act as if there are no current timer settings and will
simply operate according to the thermostat and output settings. By pressing
the TIMER ON/OFF button again, you reactivate the timer setting.
To erase the timer setting, press on the PROG SET button. P1 will start
flashing on the display. Using the + and - buttons, look for the setting
number that you want to erase and subsequently press on the C button
(erasing the timer setting). The timer setting will disappear immediately.
Summary of Contents for Malmo 363463
Page 2: ...2 ...
Page 107: ...107 ...
Page 108: ...108 EUROM Kokosstraat 20 8281 JC Genemuiden info eurom nl www eurom nl ...