USER MANUAL
PG 13
USING THE GAS BURNER
THE HOB CONTROL KNOBS
The symbols on the control knobs mean the following:
No
gas
flow
Maximum
gas
flow
Minimum
gas
flow
All operating positions must be set between the maximum and minimum flow settings, and never between
the maximum setting and the closed position.
INTRODUCTION TO THE BURNER
A
Burner cap
B
Ignition plug
C
Thermocouple
D
Wok burner cap
HOTPLATE IGNITION
To light these hotplates:
1. Choose the hotplate you want to use.
2. Push in burner control knob and rotate to “ ”.
3. Hold control knob for 2-3 seconds, them release and rotate knob to adjust the flame
height. If flame goes out, the knob was not held in for suffcient time; repeat step 2.
BURNER
1. Wok burner
• Used for fast heating.
• Used with WOK, large size pots and pans.
• For rounded bottom woks use WOK adapter.
2. Small Burner
• Used for simmering.Used with small pots and pans.
3. Semi-rapid Burner
• Used for normal cooking.
• Used with middle size pots and pans.
To conserve gas, place the pan centrally over the burner and adjust the flame so that it does not go past
the edges of the cookware.
Summary of Contents for EFS54FC-DGS
Page 2: ......
Page 28: ...USER MANUAL PG 28 NOTES ...