18 / EN
Washing Machine / User’s Manual
4.3.10.2 Functions/Programmes Selected by Pressing the Function Buttons for 3 Seconds
• Drum Cleaning
Press and hold the auxiliary function button 1 for 3 seconds to select the programme.
Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. Operate the
programme while the machine is completely empty. To obtain better results, put powder lime-scale remover
for washing machines into the detergent compartment no. “2”. When the programme is over, leave the loading
door ajar so that the inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that there is
load inside and aborts the programme.
• Child lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes
in a running programme.
C
If the Programme Selection knob is turned when the Child Lock is active, "Con" appears on the display. The Child Lock does
not allow any change in the programmes and the selected temperature, speed and auxiliary functions.
Even if another programme is selected with the Programme Selection knob while the Child Lock is active, previously
selected programme will continue running.
To activate the Child Lock:
2. Pres
s
and hold the Auxiliary Function button for 3 seconds. C03, C02, C01 will appear on the display
respectively while you keep the button pressed for 3 seconds. Then, while the light of the Auxiliary Function
button 2 is flashing, "Con" will appear on the display indicating that the child lock has been activated. If you
press any button or turn the Programme Selection knob when the Child Lock is active, same phrase will
appear on the display.
To deactivate the Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds while a programme is running. C03, C02, C01
will appear on the display respectively while you keep the button pressed for 3 seconds. Then, while the light
of the auxiliary function button 2 is flashing, "COF" will appear on the display indicating that the child lock has
been deactivated.
C
In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob to On / Off position
when no programme is running, and select another programme.
Child Lock is not deactivated after power failures or when the machine is unplugged.
4.3.11 Delayed Start
With the Delayed Start function the startup of the programme may be delayed up to 19 hours. Delayed start
time can be increased by increments of 1 hour.
C
Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the clothes.
1. Open the loading door, place the laundry and put detergent, etc.
2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3. Set the desired time by pressing the Delayed Start button.
4. Press Start / Pause button. The delayed start time you have set is displayed. Delayed start countdown
starts. “_” symbol next to the delayed start time moves up and down on the display.
C
Additional laundry may be loaded during the delayed start period.
5. At the end of the countdown, duration of the selected programme will be displayed. “_” will disappear and
the selected programme will start.
