GB
23
the button
[
]
on the control panel, the unit starts
to operate in the cold air mode, and the light
[ ]
would be on.
– Heating: Press the
[
]
button, the unit starts to
heat up, press once for low-level heating, the dis-
play would show
[
]
; press twice for high-level
heating, the display would show
[
]
Press
again to cancel the heating.
– TIMER: Press the button
[
]
repeatedly to set a
period after which the unit will turn itself off
(between 1.0 hour – 12.0 hours, in a step of 60
minutes). Once it is set, the timer symbol
[
]
on
the display would light up.
– SWING: Press the button
[
]
to activate oscilla-
tion. Press it again to cancel.
–
[+]
,
[-]
: adjust room temperature. The default set-
ting temperature is 25°C.
Temperature setting ranges from 10-35°C.
– Press
[+]
to increase the desired temperature and
press
[-]
to decrease the desired temperature.
The unit will intelligently switch between low-level
heating and high-level heating mode according to
the ambient temperature and set temperature.
– Humidification function: Press
[ ]
button to turn
on the humidification function, the humidification
indicator
[ ]
would light up. Press
[ ]
to turn off
the humidification function, and the humidification
indicator would be off. (The humidification func-
tion can also be used separately when it is pow-
ered on).
– To turn off the unit, press
[ ]
again. The fan will
continue to run for around 30 seconds, then it will
automatically turn off and return to standby mode.
If the product is not in heating mode before, it will
return directly to standby mode.
– Screen light off: After the product unit is operating
for 10 minutes, it will automatically enter the light
off screen mode, press any key to light up the
screen.
Cleaning and maintenance
DANGER! Risk of injury!
Always pull the
power plug before conducting any work on
the unit.
Cleaning the unit
– Switch off the unit, disconnect the power.
– Wipe the unit with a damp cloth.
Changing the remote control batteries
– The battery cover can be opened with a coin or
other similar things.
– Install a button cell CR2025, pay attention to the
battery polarity (“+” face up and “-” face down).
– Install back the battery cover by a coin or similar
things.
Troubleshooting
What to do when something doesn’t work…
DANGER! Risk of injury!
Unprofessional
repairs may mean that your unit will no
longer operate safely. This endangers you
and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Error/Fault
Cause
Remedy
Unit does not work.
Unit switched off?
Switch the unit on at the On/Off
switch (7).
No power supply?
Check the cable, plug, and the fuse.
If you can’t fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries and rechargeable batteries, which
are not permanently installed in waste elec-
trical devices, must be removed prior to dis-
posal and must be disposed of separately.
Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-
charged. Batteries must always be protected against
short circuits by covering the poles with adhesive
tape.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
