7
Instructions
The table fan features three speeds and a swivel action head for a smooth
oscillation action. To use the fan, follow the simple instructions below.
Place the fan on a dry, level surface where it will not overturn during use.
Make sure the speed control on top of the motor housing is in the OFF [ 0 ]
position, then insert the power plug into an appropriate electrical outlet.
Speed selection
• Move the speed control to
the desired speed setting:
0 ................OFF
1 ................LOW
2 ................MEDIUM
3 ................HIGH
Oscillation
The fan can operate in
oscillation or static mode.
• Push down the
oscillation knob
to activate the oscillation
function for widespread
breeze distribution.
The fan head will pivot from
one side to the other.
• For stationary operation,
pull up the knob to stop
oscillation when the fan
head is in the correct
position.
Tilt adjustment
The fan head can be slightly tilted up or down.
• Loosen the pivot knob, adjust the fan to the desired angle, then tighten the
knob firmly to secure.
Speed control
Oscillation knob
Pivot knob
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
