INSTRUCTION MANUAL
FOR HEATING STAGES
WITH THE EUROMEX AE.5168 TEMPERATURE CONTROLLER
Use:
1) Connect the AE.5168 temperature controller to
the heating stage by means of the connector at
the back side of the controller (Z) and fasten the
connector
2) Connect the plug to the mains supply (W)
3) Set the main switch on the front panel to position 1
All digits of both displays (A) and (B) will light
up as a test
The display (A) will show:
“OFF”
4) Push the on/off (F) switch
To switch the heating stage on or off.
At first use the upper display shows 37° C as
wanted temperature for the heating stage
(Z)
(W)
(A)
(B)
(C)
(D)
(E)
(F)
(G)
