Euromex iScope IS.1152-EPL User Manual Download

Page: 17 / 18

Page 17

Accessories and spare parts

IS.6010

EWF 10x/20 mm eyepiece

IS.6011 EWF 10x/22 mm eyepiece

IS.6099 Pair of eye cups for iScope models

IS.7104 E-plan EPL 4x/0.10 objective

IS.7110 E-plan EPL 10x/0.25 objective

IS.7110 E-plan EPL 20x/0.40 objective

IS.7140 E-plan EPL S40x/0.65 objective

IS.716 E-plan EPL S60x/0.85 objective

IS.7100 E-plan EPL S100x/1.25 objective

IS.8804 E-plan EPLi 4x/0.10 IOS objective, infinity corrected

IS.8810 E-plan EPLi 10x/0.25 IOS objective, infinity corrected

IS.8820 E-plan EPLi 20x/0.40 IOS objective, infinity corrected

IS.8840 E-plan EPLi S40x/0.65 IOS objective, infinity corrected

IS.8800 E-plan EPLi S100x/1.25 IOS objective, infinity corrected

IS.7204 Plan PLi 4x/0.10 IOS objective, infinity corrected

IS.7210 Plan PLi 10x/0.25 IOS objective, infinity corrected

IS.7210 Plan PLi 20x/0.25 IOS objective, infinity corrected

IS.7240 Plan PLi S40x/0.65 IOS objective, infinity corrected

IS.7260 Plan PLi S60x/0.85 IOS objective, infinity corrected

IS.7200 Plan PLi S100x/1.25 IOS objective, infinity corrected

IS.7710 Plan Phase PLPH 10x/0.25 objective

IS.7720 Plan Phase PLPH 20x/0.40 objective

IS.7740 Plan Phase PLPH S40x/0.65 objective

IS.7700 Plan Phase PLPH S100x/1.25 objective

IS.8910 Plan Phase PLPHi 10x/0.25 IOS objective, infinity corrected

IS.8920 Plan Phase PLPHi 20x/0.40 IOS objective, infinity corrected

IS.8940 Plan Phase PLPHi S40x/0.65 IOS objective, infinity corrected

IS.8900 Plan Phase PLPHi S100x/1.25 IOS objective, infinity corrected

PB.5155 Microscope 76 x 26 mm glass slides, edges grinded, packed per 50 pieces

PB.5168 Cover glasses 22 x 22 mm, thickness 0.13-0.17 mm, packed per 100 pieces

PB.5255 Immersion oil n=1.482, 25 ml

PB.5274 Isopropanol 99%, 200 ml cleaning liquid

PB.5245 Lens cleaning paper, 100 sheets

More products can be found on our website.

Summary of Contents for iScope IS.1152-EPL



















Search results

Summary of Contents for iScope IS.1152-EPL

Reviews:

Related manuals for iScope IS.1152-EPL

Brands by name

Popular brands

Euromex iScope IS.1152-EPL, User Manual

Search results

Summary of Contents for iScope IS.1152-EPL

Reviews:

Related manuals for iScope IS.1152-EPL

Brands by name

Popular brands