Page 5
Preparing the iScope microscope for use
Your microscope is a delicate product, please handle it with care.
Carefully remove the items from their packing and place them on a flat, firm surface. Please do not
expose the microscope to direct sun light, high temperatures, damp, dust or acute shake. Please
make sure the worktable is flat and horizontal.
When moving the microscope, use the left hand to hold the transport handle at the backside of
the microscope and with the right hand the bottom of the microscope.
Transport handle
Caution! Holding the
microscope with the stage, the
stage focusing knob will damage the microscope.
Insert the power cord in the backside of the microscope and use the cable storage CSS - Cable
Storage System – to store the cable after use
CSS - Cable Storage System
Caution! If the bacterial solution or water splatters over the stage, objective or head, pull out the
power cord immediately and dry the microscope.
For safety reasons, make sure the power switch is turned off and remove the plug before
A
B
C
D
X
E
F
G
H
I
