AQUA DIST
10
The first time the distiller is used, the switch is already in the “on” position. It therefore isn’t
necessary to turn it on the first time.
The process is automatically interrupted when distilling has finished.
Approximately one hour after turning on the power switch, the distilled water begins to drip down
into the collection bottle. It takes 5-6 hours to distil 4 litres of water.
When the power supply is cut off, another bottle may be filled immediately.
Store the distilled water in a sealed container in the fridge. Before use, shake the bottle to
aerate the water.
SAFETY PRECAUTIONS
1. Place the distiller on a dry, flat and heatproof surface and keep it away from any heat source.
As the fun uses air to cool the unit, place it in a well ventilated space.
2. Do not store hot water in a platic bottle.
3. Unplug the power cable to interrupt the distillation process.
4. Do not remove the upper cover while the distiller is working.
5. Use a power socket with a suitable voltage and do not share the same socket with other
electrical appliances in order to prevent overloading.
6. Keep out of reach of children.
7. Unplug the power cable when filling or cleaning the distiller or when it is not in use.
8. Never immerse any part of the distiller for cleaning purposes.
Collection
bottle
Switch
Summary of Contents for AQUADIST
