REV.0.02_COD.500201_A4
PAG. 10
2.4 Recommendations
to
ensure
high
quality
performance
•
The user must oversee the machine during the cycle.
•
The injection tube for washing water must always be connected with the appropriated basket.
•
When the machine is running do not interrupt the cycle since this jeopardises disinfection.
•
Check periodically using chemical indicators to ensure correct disinfection.
•
Use recommended detergents and chemical additives only.
The use of other products may damage the machine.
•
During the manipulation of treated objects, it is required the use of appropriated PPE to prevent contact
with infected material and the risk of contamination.
•
Do not introduce dirty instruments of substances that must not be discharged in sewage system (in
accordance with current legislation) but must be disposed in specific way.
•
Recommending chemical additives does not make the manufacturer responsible for any damage to the
materials and objects treated.
•
Check that type of chemical product is suitable for the specific washing program used.
•
Follow the manufacturer's indications when using chemical products and use them for the foreseen
use only.
•
The machine was designed for use with water and chemical additives.
Do not use organic or other types of solvent as this may result in the risk of explosion or the rapid
deterioration of certain machine parts.
•
Residues of solvents or acids, particularly “hydrochloric acid”, can damage steel.
Contact should be avoided.
•
Use original accessories only.
•
Do never use soap powder.
•
Do never use foaming detergent.
•
The machine is to be used only with the baskets and or accessories included by the manufacturer.
•
Accessories which are not approved by the manufacturer may compromise the results achieved as well
as user safety.
•
Do never use chemical products based on chlorides (bleaches, sodium hypochlorite, hydrochloric acid
and so on).
•
These kinds of chemical detergents irreparably damage the machine and jeopardise the integrity of
materials and objects treated.
The taps of the water feeding must be always turned off, as the safety and diagnosis system will be
deactivated, in the following situations:
•
if the machine is left unused;
•
if the machine is disconnected from the electrical connection.
The manufacturer declines all responsibility for personal injury or material damage resulting from
the non-observance of the above rules.
The non-observance of these rules produces the total and prompt cancellation of the guarantee.
