REV.0.02_COD.500201_A4
PAG. 57
17.1.3 Data saving during the cycle
To save the data at the end of every washing program, insert the USB key on the dedicated port and follow the
procedure:
Set the parameters P1.04 at 3 and P1.05 to YES.
Start the washing program.
At the end of the cycle the machine creates the file with the samples of temperature and pressure probes with the
information of every washing program phases.
To every washing program are associated two files which contain the data structured as below.
The file *****G.TXT contains:
N.B.: the *****G.TXT will be saved in automatically at the end of the washing program.
The file *****C.TXT contains:
N.B.: To save the *****C.TXT, insert the key in the dedicated port, enter the menu, select the
USB menu and download from the machine the information of historical.
Information related to
washing program.
Information related to
machine
and
operator.
Information related to
every
washing
program phase.
Information related to
machine
and
operator.
Information related to
washing program.
Data
value
to
sampled data.
Number of samples.
Sampling time.
