3
SPECIFICATIONS
IMPORTANT
Iron
of Model EVG 35 series is hard-wired into boiler.
Iron
for Model EVG 36 series must be plugged into boiler. See instructions below.
Boiler
for Models listed in the middle column above must be plugged into a suitable 15 AMP outlet;
Boiler
for Models listed on the right column must be plugged in to a 20 AMP outlet.
For transport, use the proper handle. Never pull the electric cable.
SPECIAL SAFETY INSTRUCTIONS
1.
NEVER UNSCREW THE WATER CAP (WITH SAFETY VALVE) DURING USE (WHILE
THE BOILER IS UNDER PRESSURE) as the pressurized steam can lead to scalds.
2.
UNSCREW THE WATER CAP ONLY AS INSTRUCTED IN OPERATING
INSTRUCTIONS.
3.
RISK OF FIRE – Turn off the boiler and iron switches and unplug the boiler when finished
ironing.
4.
To avoid a circuit overload, do not operate another high voltage appliance on the same circuit.
SAVE THESE INSTRUCTIONS
MODEL:
EVG-353+355, EVG 367+369
EVG-354+356, EVG-368 +EVG-3610
POWER SUPPLY:
120 V - 60Hz
120 V - 60Hz
TOTAL INSTALLED POWER:
1700W
2000W
IRON POWER:
700 W
700 W
BOILER POWER:
1000 W
1300 W
BOILER CAPACITY:
4.5 L. / 1.2 U.S. gal (INOX)
4.5 L. / 1.2 U.S. gal (INOX)
WATER CAPACITY:
3.4 L. / 0.9 U.S. gal
3.4 L. / 0.9 U.S. gal
OPERATING STEAM PRESSURE: 280 kPa (41 psi) (2.8 bar)
280 kPa (41 psi) (2.8 bar)
MAXIMUM PRESSURE:
500 kPa (72 psi) (5 bar)
500 kPa (72 psi) (5 bar)
WEIGHT:
15.5 kg.
15.5 kg.
OVERALL DIMENSIONS:
25x29x89 h. cm
25x29x89 h. cm
PLUG:
15 Amp
20 Amp
MADE IN ITALY
Summary of Contents for Hi-Steam EVG-35 Series
