3
Open the electric access panel by removing the 4 screws on the front of the panel with
the allen wrench provided.
Place the base on top of the column, and attach the base to the column with 8 screws
provided.
Reach into the electric access panel opening, and plug the wire hanging from the base
into the socket of the electric access panel.
Then close the electric access panel with the 4 screws.
Take the iron rest and attach it on the vacuum board with 4 screws.
Turn over the vacuum board and put it in the upright position.
Slip the cloth on to the garment catch tray, and then attach the garment catch tray to
the column and base with screws.
Column
Ironing buck
Screws
Base
Plug
Socket
Electric access panel
Iron rest
Screws
Iron rest
Screws
Screws
Garment catch tray
Summary of Contents for MODEL PND-2500A
Page 6: ...6 ...
