EUROPEAN FINISHING EQUIPMENT MODEL PND-2500A, Manual

The EUROPEAN FINISHING EQUIPMENT MODEL PND-2500A is a state-of-the-art finishing equipment that offers impeccable precision and efficiency. Enhance your productivity with this user-friendly product by easily accessing and downloading the free manual from our website, 88.208.23.73:8080, to optimize your experience.

Share

1
2
3
4
5
6

Page: 4 / 6

background image

4



Take the water tank/hose support stand (optional) and attach it to the vacuum board
by means of 2 screws.

WARNING: the water tank/hose support stand can carry a maximum weight of 11
pounds.



Remove black plate (“braccio stiro”).



Take the sleeve ironing arm and attach it to the ironing buck by means of 2 screws.



Plug wire from sleeve arm into receptacle on back of column.



Then take the board prontotop (pad/cover) and the arm padding and slip them on
the board and sleeve buck.



Then, tighten each pad/cover by means of drawstrings to insure a perfect fit.

Water tank stand

Screws

Sleeve ironing arm

Screws

«
...
2
3
4
5
6
»

Summary of Contents for MODEL PND-2500A







Reviews:

No comments

Related manuals for MODEL PND-2500A

Brand: OMAS Pages: 16

Brand: Black+Decker Pages: 24

Brand: General Pages: 4

Presrv PRW24C32CG

Brand: Zephyr Pages: 56

Brand: Rommelsbacher Pages: 12

Brand: WolfgangMOCK Pages: 5

Brand: CombiSteel Pages: 21

Crepes Creativ 139 006

Brand: Lagrange Pages: 52

Brand: Bestron Pages: 36

Brand: Promax Pages: 44

Brand: T-Fal Pages: 54

Brand: Kasanova Pages: 40

Brand: Moulinex Pages: 25

Brand: Grundig Pages: 128

Brand: Cloer Pages: 48

Brand: My Life My Shop Pages: 2

Brand: Black & Decker Pages: 11

Brand: Black & Decker Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands