Product Operation:
The appliance is operated by the E-touch App, the main standby power switch to the Suites product is located to the right of the heater outlet, which is marked with a light bulb image, to
activate the product, this switch must be switch to the “ON” position.
The first time the Suites product is activated both the illumination and heater will function, to switch the heater “Off” simply reduce the Room Temperature setting down to 10 degrees on
the E-touch App control.
(Heater unit cut-out) (This is a safety feature, to safe guard against further damage to the product).
If the airflow is restricted the heater will automatically turn off. This is can occur due to incorrect installation or obstruction.
To reset the heater function:
Please note that both the fire effect fan and heater fan omit a low decibel noise, both of which are normal operating characteristics.
•
Isolate from the mains power supply.
•
Leave product to cool.
•
After the unit has cooled to room temperature, remove the obstruction, if obstructed, and check installation.
•
After
10 minutes the Thermo Switch (cut-out) in the heater will reset.
Heater Unit Spec & Certification
The 1200w Heater Unit conforms with the following:
UL E54813— UL E228455— UL E140692— UL E54813
