When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
① Read all instructions before using this electric fireplace.
② This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. The trim around the heater outlet becomes hot during heater operation. DANGER: High
temperatures may be generated under certain abnormal conditions. Do not partially or fully cover or obstruct the front of this heater.
③ Extreme caution is necessary when any heater is used by or near children or at risk individuals and whenever the unit is left operating and unattended.
④ Young children should be supervised to ensure that they do not play with the appliance.
⑤ The appliance is not intended for use by young children or at risk individuals without supervision.
⑥ Do not operate the unit after it malfunctions. Disconnect power at the service panel and have the unit inspected by a reputable electrician before reusing.
⑦ If the supply cord is damaged, it must be replaced by the manufacturer, or its service agent, or a qualified person in order to avoid a hazard.
⑧ Do not use outdoors.
⑨ Never locate fireplace where it may fall into a bathtub or other water container.
⑩ To disconnect the fireplace, turn the controls off, and turn off power to heater circuit at main disconnect panel.
⑪ Do not run the cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Arrange cord away from traffic area and where it will not be tripped over.
⑫ Do not locate the heater immediately below a fixed socket-outlet.
⑬ Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage to the heater.
⑭ To prevent a possible fire, do not block air intakes or exhaust in any manner.
⑮ All electrical heaters have hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored.
⑯ Use this fireplace only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
⑰ Do not change the plug in any way. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
⑱ Do not burn wood or other materials in the electric fireplace.
⑲ Do not strike the fireplace glass.
⑳ Always use a certified electrician should new circuits or outlets be required.
㉑
Always use properly grounded, fused and polarized outlets.
㉒
Disconnect all power supply before performing any cleaning, maintenance or relocation of the unit.
㉓
When transporting or storing the unit and cord, keep in a dry place, free from excessive vibration and store so as to avoid damage.
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void user's authority to operate the equipment.
IMPORTANT INSTRUCTIONS:
