26
Connect the flexible gas line from the valve to the gas supply pipe. After the gas supply has been
connected, open the main supply and apply a leak detection fluid (or gas detector) to all the fittings to
check for gas leaks.
Never use a flame to test for leaks.
If you are installing a propane burner, check
that the air shutter (see Figure 22) is in the open position. Replace the burner in the burner module.
Ensure that the burner inlet tube is in the shutter box and tighten the screw shown in Figure 17.
Air shutter shown in
the open position (for
propane
only
).
Figure 21
Figure 22
