32
1. STOP! Read the safety information on page 31.
2. This appliance is equipped with an ignition device which automatically lights the pilot. Do
not try to light the pilot by hand.
3. Push the
OFF
button on the remote control and ensure the appliance is off.
4. Wait five (5) minutes to clear out any gas. Then smell for gas including near the floor. If
you smell gas, STOP! Follow “B” in the Safety Information on page 31. If you don’t smell
gas, go to the next step.
5. Press the
OFF
and
p
buttons simultaneously. Release the buttons once you hear
a beeping noise. This acoustic signal tells you that the start
sequence has begun. Further short signals will continue until main
gas flows and the burner is lit. If the pilot or burner does not light,
go back to Step 3, above.
6. Use the up and down arrows to adjust the flame height.
LIGHTING THE FIRE
Push the
OFF
button on the remote control to turn the appliance
off.
TO TURN OFF THE APPLIANCE
OFF
OFF
The
VBM
burner module has two safety features which affect the operation:
1) two-button child safety ignition
2) 45 second safety timer
The safety ignition requires that two buttons be depressed to begin the ignition sequence and the
timer requires that 45 seconds elapse between start attempts.
VBM
Burner Only
