background image

 

Document ID:06080001 

Rev: L 

Technical Support: 800-626-6912 

Page 17 of 24

C

OMPONENT 

R

EFERENCE

 

Crystal Clean

 Pipe-Free

®

 

Inside Basin View 

 

Crystal Clean

 Pipe-Free

®

 

Front View 

 

Traditional Whirlpool 

(with Jets)

 

Inside Basin View 

 

Traditional Whirlpool 

(with Jets)

 

Front View 

 

 

P

EDICURE 

P

RODUCT 

G

UIDELINES

 

Because there are so many different products on the market, it is difficult for us to list all of the pedicure 
products that are safe to use in our pedicure spas.  However, the following guidelines can be used: 
 

  It is your responsibility to understand and follow your state’s regulations regarding product usage 

and disinfecting requirements. 

  Do not use any products containing a foaming agent; this will cause excessive foam. 

  It has been determined that products containing non-dissolving abrasives (such as sand and sea 

salts) will not harm the internal component structure of your pedicure spa as long as the entire 
EUROPEAN TOUCH cleaning requirements are followed without deviation. 

  Oil based products may be used in your pedicure spa as long as the cleaning requirements are 

met. 

  Always use pedicure products and cleaning solutions in accordance with each manufacturer's 

directions. 

 

EUROPEAN TOUCH whirlpool pedicure spas will give you many years of service as long as proper 
precautions, precise cleaning, and operating instructions are followed.  It is the responsibility of the 
pedicure spa owner to properly clean and maintain the pedicure spa. 
 
If you are experiencing problems cleaning your pedicure spa, please contact the manufacturer of your 
pedicure products or EUROPEAN TOUCH Technical Support at 800-626-6912. 

Summary of Contents for ALTERA SPA

























Reviews: