Document ID: 33080000
Rev: C
Technical Support: 1-800-626-6912
Page 16
R
EMOVING
T
HE
C
LEAN
T
OUCH
A
SSEMBLY
F
ROM THE
B
ASIN
F
LOOR
1. To
remove
the Clean Touch
Assembly, move the longer nose
in the direction as shown.
2. Separate the clean touch inlet
cover from the base twisting
counter-clockwise.
3. Remove the impeller by lifting
from the basin.
P
EDICURE
P
RODUCT
G
UIDELINES
Because there are so many different products on the market, it is difficult to list all of the pedicure
products that are safe to use in our pedicure spas. However, the following guidelines can be used:
•
It is your responsibility to understand and follow your state’s regulations regarding product
cleaning and disinfecting requirements.
•
Do not use any products containing a foaming agent; this will cause excessive foam.
•
It has been determined that products containing non-dissolving abrasives (such as sand and
sea salts) will not harm the internal component structure of your pedicure spa as long as the
entire EUROPEAN TOUCH cleaning requirements are followed without deviation.
•
Oil based products may be used in your pedicure spa as long as the cleaning requirements are
met.
•
Please use pedicure products and cleaning solutions in accordance with each manufacturer's
directions.
•
It is your responsibility to understand and follow your state’s regulations regarding
product cleaning and disinfecting requirements.
EUROPEAN TOUCH pedicure spas will give you many years of service as long as proper
precautions, precise cleaning, and operating instructions are followed. It is the responsibility of the
pedicure spa user to properly clean and maintain the pedicure spa.
