70080000 Manual Sogno DreamWave Spa
Rev A
Revision Date: 25 March 2010
Page 21 of 42
R
EMOTE
C
ONTROL
Preset Programs
For selecting a program with
the corresponding course
name
RECLINE Buttons
Use [ ] and [
] to adjust the
angle of the reclining seat
back.
POWER Button
For turning the remote control
power ON or OFF. Pushing the
POWER button while the chair
is activated causes the rollers
to return to their storage
positions before the chair is
shut off. The button is lit in
green while the power to the
remote control is on, in orange
while the power is off, and in
red while the chair is stopped
in an emergency.
VIBE OFF Button
For canceling vibration
operation during Preset
Programs, use this button.
Remote Control Display
Information, such as massage
action descriptions, status of
progress, and the intensity and
speed of the massage in
progress, is displayed with
both characters and symbols.
(See next page.)
ROLLER Buttons
During Preset Programs, roller
shoulder positions can be
adjusted using [
] and [
]
immediately after the Shiatsu
points are located. In Manual
Selection Mode, roller positions
can be adjusted using [
] and
[
].
BACK 3-D Buttons
For adjusting the intensity of
massage stimulation on the
back, use [+] and [-]
STOP Button
Use this button to shut the
chair off immediately in an
emergency or if there is a
malfunction during operation of
the chair. The rollers will stop
immediately.
AIR LEVEL Button
For adjusting the intensity of air
pressure in 3 settings (high,
medium, and low) during
Preset Programs
Warning
•
Do not spill water and/or other liquids on the remote control
•
Do not handle the remote control with wet hands
•
Do not sit on the remote control. Do not drop or step on the remote control. Do not pull the remote control
cord forcibly
•
Do not use pointed or hard objects to push the buttons or display on the remote control
Ö
May result in damage to the remote control
