background image

 

70080000 Manual Sogno DreamWave Spa 

Rev A 

Revision Date: 25 March 2010 

Page 29 of 42 

To stop mid-massage, press the POWER button. The rollers will return to their storage positions and stop.  
In an emergency or if there is some malfunction during operation of the chair, press the STOP button. The 
rollers will stop immediately. After confirming safety, press the POWER button. The rollers will return to their 
storage positions and stop.  

 

Caution 

 

If you feel the massage is too strong, reduce the stimulation according to this Operating 
Manual. If this solution does not work, stop using and contact the vendor.  

Ö

 

May result in injury if you continue use with high stimulation under such circumstances.  

 

Do not place hands or feet into the roller tracks, into the space between the seat back and 
the seat or into the moving parts. Do not sit wearing hard objects, such as hair 
accessories, necklace, watch, bracelet, or ring.  

 

 

1. Press the POWER 

button 

If no selection is made 
within 5 minutes, the 
power is automatically 
shut off. 

2. Press the desired button 

The selected program will be 
indicated in the display.  
* The Automatic Shiatsu Point 
Locator starts locating Shiatsu 
points.  The Automatic Shiatsu 
Point Locator is not available 
during Full-Body Air Program 
and DreamWave Program.  
Note:  

For accurate Shiatsu 

Point location, always sit as far 
back as possible and place your 
head on the Shoulder Massage 
Unit. 

 

 
 
4. The program starts 

The progress of the 
program is indicated 
on the display of the 
remote control with 
the program name. 

3. The ROLLER positions can be 

adjusted 

With the ROLLER buttons, the 
vertical position of the rollers can 
be adjusted.  If no adjustment is 
required, do not use these 
buttons. 

 

 

 

5. Program completed.  

When the massage program 
finishes, the rollers return to their 
storage positions (upper part of 
the seat back).  Then the power 
to the remote control is shut off. 
However, reclining of the seat 
back and ON/OFF of the heater 
are still enabled. 

 
 
 

  Caution 

 

Keep massage sessions to no more than 15 minutes in length. Area Specific Massage of 
any particular area on the body to no more than 5 minutes. 

Ö

 

Continual use for extended periods of time can result in over-stimulation, which could 
cause the opposite of the desired effect, or even injury.  

Set 30 minutes in total for reference per day and keep appropriate intervals between each 
massage session. 

* For children aged 14 years or over, use only the Youth Program and only one session per 
day. 

 

Summary of Contents for sogno dreamwave








































Reviews: