Europort EPA900, User Manual

8

EUROPORT EPA900 User Manual

3.9  Power supply and serial number

FUSE HOLDER/IEC SOCKET

Connection to an AC power supply is made via an IEC socket. It complies with 

applicable safety regulations. A suitable AC power cord is included. Replace the 

fuse with a fuse of the same type.

Fig. 3.9: Power supply and fuse

◊ 

To avoid an electric shock, turn off and unplug the unit before replacing 
the fuse.

POWER Switch

Use the POWER switch to start up the unit. The POWER switch should be in the 

“Off” position when you connect the unit to the AC power supply.
To disconnect the unit from the power supply, pull out the power plug. 

When starting up the unit, ensure that the power plug is easily accessible.

◊ 

Please note: Switching the POWER switch off does not completely 
disconnect the unit from the power supply. For this reason, you should 
unplug the power cord if the unit is not going to be used for a long 
period of time.

VOLTAGE SELECTOR

The VOLTAGE SELECTOR switch lets you set the correct operating voltage.

◊ 

Before connecting the unit to the mains, please check that it is set to 
the correct supply voltage.

◊ 

You have to use another fuse if you set the unit to another supply 
voltage. The correct value is specified in Chapter “Specifications”.

SERIAL NUMBER

The serial number can be found on the back of the mixer. It is needed for 

online registration.

4.  Applications

The EPA900 can be used for simple sound tasks, e.g., amplification of the 

presenter’s voice, playback sound, or karaoke applications, as well as for 

demanding tasks such as band amplification or stage monitor sound. A typical 

example of use as a sound system for music with live instruments and players is 

given below.

EPA900

Keyboard

CD player

Drum Computer

ULTRAVOICE XM8500

Electric Guitar

GMX212

Stereo

AUX In

In 3

In 1

In 2

In 5/6

In 7/8

Speaker Output

Lef/Main

Fig. 4.1: Sound example