202002-400A-ENG
User manual - JETPRO 100-7, 120-7, 130-7
P7
3. YOUR MACHINE
3.1. DESCRIPTION
Machine for applying thin films of filler.
It uses a valveless pump, is easy to maintain, with a round stainless steel tank for easy cleaning, a Ø35 mm
drain valve. It is equipped with large diameter, flat profile, inflatable tyres for better stability.
APPLICATIONS
All types of ready-to-use film plasters: smoothing coating, raking coating, casing coating, bituminous coating ...
Can also make droplet type applications with an optional kit and a compressor.
3.2. TECHNICAL CHARACTERISTICS
Jetpro 100-7
Jetpro 120-7
Jetpro 130-7
Max. working pressure
120 bar
130 bar
Max. product flow-rate
6 L/min
7 L/min
9 L/min
Electric motor
2,2 kW
3 kW
4 kW
Power
230 V / 50 & 60 Hz
400 V Tri / 50 & 60 Hz
Type of pump
volumetric screw
Pump
JET 2
JET 3
JET 5
Tank capacity
110 L
Max. nozzle size (new)
0,045"
0,055"
0,065"
Dimensions (L x w x h)
143 x 65 x 97 cm
Weight
90 kg
100 kg
110 kg
Noise level
91 Lwa
Delivered with
- a Ø16 x 20 m hose
- a Ø19 x 30 m hose
- a Ø16 x 2,5 m easy handling flexible hose
- a Jetpro spray-gun with nozzle holder
- a TT3 443 nozzle
- a toolbox containing:
• a 17 spanner
• an open-end wrench 22/32
• a multigrip plier
• three Allen keys Ø2, 5 and 8
• two cleaning balls and a cleaning brush
• 1 L of storage liquid
Do not use products with grain size, mortars, lime based renders, technical or special
coatings with heavy loadings