Advanced Configuration
VoIP²ALL 8 - 16 - 24 Channel Gateway User Guide
www.eurotech-communication.com
36
Test Call Profile
- A group of parameters of the SIM used when making Test calls. The default
profile is 0, disabled. To enable, see
Configuring Test Call Profile
on page 48.
Test SMS Profile
- A group of parameters of the SIM used when making Test SMS. The
default profile is 0, disabled. To enable, see
Configuring Test SMS
on page 49.
Block Options
- Allows you to Block or Unblock the SIM. (See
Blocking SIMs
on page 42.)
4)
Click
Save Card
.
4.7.3.1.
CONFIGURING A PROFILE
A Profile is a predefined group of parameters that a SIM uses when activated. You can define up to
10 different profiles. Each SIM uses one of the predefined profiles.
Using profiles you can easily define parameters for a group of SIMs.
To define a profile:
1)
On the Main Toolbar, click
Virtual SIM
.
2)
Select the
Profile
tab.
3)
In
Server Profiles Selection
, select a profile from the list. (0 - 9).
4)
Define the following parameters:
PARAMETER
DESCRIPTION
Index
The number of the profile (view only).
Name
The name of the profile.
MCC
This locks the country code of the SIM cellular network.
The default is 0, which disables the lock.
MNC
This locks the network code of the SIM cellular network.
The SIM only tries to connect to this network. The default is 0, which
disables the lock.
Note: Parameters MCC and MNC must be defined together.
PIN Code
The PIN Code for the SIM when it is PIN Code protected.
The PIN code is a 4 digit number.
CLIR
Show or hide the SIM number in calls to the cellular.
The options are:
By Network - Uses the cellular network setting.
Hide - Hides the caller ID (when the cellular network support is
sending private calls).
Show - Shows the caller ID.
SMSC Number
The number of the SMS service (view only).
BCCH
Locking the port with the SIM on a specific BCCH.
For details, see
BCCH Configuration
on page 59.