Advanced Configuration
VoIP²ALL 8 - 16 - 24 Channel Gateway User Guide
www.eurotech-communication.com
47
Accept Recharging
Not is use.
Minimum Balance
The recharge request is sent when the Gateway detects that
the balance of the SIM is below the
Minimum Balance
or
when it is scheduled in
Activation type
.
Activation type
When to automatically send the recharge request. There are
three options:
SIM Activation
- After the SIM is registered in the cellular
network and an outgoing call was made.
Calls
- After the number of calls defined in
Activation
Threshold
.
Minutes
- After the number of calling minutes defined in
Activation Threshold
.
1)
Click
Save
.
4.7.8.1.
CONFIGURING VOUCHERS
In the
Vouchers
tab you load the recharge vouchers for the SIMs.
A list of vouchers can be defined for each cellular network.
Each voucher contains the recharge key code and the status of the voucher.
Key Code - The recharge key for this voucher is usually printed on the voucher card.
Status - The current status of the voucher:
0 - Not used.
1 - Currently in use.
2 - Used successfully.
3 - Used unsuccessfully.
The following is an example of a DTMF voucher number:
0123456#p01234#P
In this example, the recharge key code consists of two codes. After each code you need to send #.
We added short pause (marked by p) between the codes and a long pause (marked by P) at the end.
To add a new voucher:
1)
On the Main Toolbar, click
Virtual SIM
.
2)
Select the
SIM Servers
tab.
3)
Click
Syncronization
.
4)
Select the
Profile
tab.
5)
In
Servers Profiles Selection
, select a profile.
6)
In the
MCC
and
MNC
parameters, enter network and country code of the SIM.
7)
Click
Save
.
8)
Select the
Voucher
tab.
9)
In the
Server
field, select a SIM Server to work with. The SIM Servers are listed by their IP
address.