APOLLO 1U ICE
Internal configuration
Drive Bay Module
The drive bay module features:
•
Slimline slot loading DVD/CDRW (Primary Slave).
•
1.44MB floppy disk drive.
•
Slimline 40GB 2.5" hard disk drive (Master).
•
CD/DVD adapter pcb.
It is shown in the following photographs:
CD/DVD adapter pcb
To remove the drive bay module, follow these steps:
1
Unplug the FDD flat flexible connection to the APOLLO SBC, the IDE connection
cable and all power cables.
2
Undo the four countersunk screws through the base that retain the Drive Bay
Module in the enclosure.
3
Withdraw the whole assembly from the unit.
To install the module, reverse the above procedure.
© 2007 Eurotech Ltd Issue C
29
