background image

 

VULCAN Quickstart 

Appendix – Contacting Arcom 

© 2005 Arcom  Issue D

 

23 

Appendix – Contacting Arcom 

Arcom sales 

Arcom’s sales team is always available to assist you in choosing the board that best 
meets your requirements. Contact your local sales office or hotline. 

Sales office US 

Sales office UK 

Arcom  
7500W 161

st

 Street 

Overland Park 
Kansas 
66085  
USA 

Tel: 

913 549 1000 

Fax:  913 549 1002  
E-mail: 

us-sales@arcom.com

 

 

Arcom  
Clifton Road 
Cambridge 
CB1 7EA 
UK 

Tel: 

01223 411 200 

Fax:  01223 410 457 
E-mail: 

sales@arcom.co.uk

 

Comprehensive information about our products is available from our web sites: 

www.arcom.com

 and 

www.arcom.co.uk

.

  

 

While Arcom’s sales team can assist you in making your decision, the final 
choice of boards or systems is solely and wholly the responsibility of the buyer. 
Arcom’s entire liability in respect of the boards or systems is as set out in 
Arcom’s standard terms and conditions of sale. If you intend to write your own 
low level software, you can start with the source code on the disk supplied. This 
is example code only to illustrate use on Arcom’s products. It has not been 
commercially tested. No warranty is made in respect of this code and Arcom 
shall incur no liability whatsoever or howsoever arising from any use made of 
the code. 

 

Technical support

  

Arcom has a team of technical support engineers available to provide a quick 

and free 

response to your technical queries.  

Technical support US 

Technical support UK 

Tel: 

913 549 1010 

Fax:  913 549 1001 

E-mail: 

us-support@arcom.com

 

Tel: 

+44 (0)1223 412 428 

Fax:  +44 (0)1223 403 409 

E-mail: 

euro-support@arcom.com

 

 

Summary of Contents for Arcom VULCAN


























Reviews: