CUSTOMER CARE CENTER 800.898.1879 www.eurotechappliances.com
Pre-wash Button (E)
For heavily soiled items, press this button to
run the pre-wash cycle. Be sure to put detergent
in the pre-wash compartment of the detergent
drawer. The button glows while the pre-wash cycle option is on.
Note: Pre-wash cannot be used with any Delicate
program.
Extra Rinse Button (F)
Select this option to add one or two extra rinse
cycles. The Extra Rinse Button glows when the
option is on. See pages 11-12 for information
regarding the number of rinse cycles added to
various programs when you select this option.
Recommended for those with soft water or
detergent allergies. Note: Option not available
with Quick Wash, Spin, and Dry programs.
Start Button (G)
Once you have set the wash program, drying
time, and pre-wash or extra rinse options, press
this button to start the program.
Getting Started
8
Understanding the Control Panel
On/Off Button (A)
Press this button to turn the main power to the machine on or off. When
the power is on and the Program Knob is on the Stop position, the Start (G)
button flashes.
Program Knob (B)
Refer to the table on pages 11-12 to determine the right program for your
current wash load. Turn knob to select correct program.
Stop Position
To stop the machine after starting a program, turn the Program Knob to the
Stop position. When you interrupt a program by turning the dial to Stop, the
door lock remains engaged for a two-minute safety delay, after which you
may open the machine door. To restart the machine, reposition the Program
Knob and press Start (G).
If you wish to use the drying function only, turn Program Knob to dry and set
the drying time with the Drying Time Knob.
Note: Before starting a program, the machine will drain
any water already in the machine, so you may need to add
detergent before you press Start (G).
Cycle Indicator Lights (C)
The light indicates progress of the wash/dry cycle as it occurs.
When the Stop light glows, the program is complete. After a two-minute
delay, the door lock will release so you can open the door.
Drying Time Knob (D)
Set knob to the number of minutes you wish to dry the load. See page 11
for recommended dry times. To prevent over-drying and damage to sensitive
fabrics, start with a shorter time and add time until the load is dry. To use
the dry function only, turn Program Knob to dry, set Drying Time Knob to
number of minutes desired and press Start (G).
PRE-WASH / WASH
RINSE
SPIN
DRY
STOP
G
Start Button
F
Extra Rinse Button
E
Prewash Button
C
Cycle Indicator Lights
A
On/Off Button
D
Drying Time Knob
B
Program Knob
(C)
(A)
(E)
(F)
(G)
