ReliaGATE 10-10
User Manual
Important user information
7
REGATE-10-10_UsrMan_EN_1.5
Installation
WARNING!
•
Verify that the mounting location can withstand the added loads caused by the addition of the
device, it should be firmly secured so that it will not cause any potentially hazardous situations
(e.g. falling down due to vibration or shock)
•
Do not operate the device near heat sources or flames.
NOTE:
If the device must be moved from one place to another with different ambient temperatures, ensure sufficient
time for the temperature of the device to stabilize before repowering.
Ventilation
WARNING!
Ensure adequate ventilation to avoid overheating, Eurotech suggests the following steps:
•
When installing the device within a cabinet, rack or other enclosed space, be sure to leave
sufficient space to allow adequate air circulation
•
Do not block any ventilation openings
Maintenance
DANGER!
•
Never open, dismantle or repair the device!
•
For your maintenance or repair requirement please contact a qualified Eurotech engineer.
If the device does not function correctly and you are unable to find a solution, feel free to contact
the Eurotech Technical Support Team.
If the equipment does not work properly, especially if it smells unusual, unplug it immediately and contact the
Eurotech Technical Support Team (see last page of this manual for further details).
Cleaning
WARNING!
When cleaning the device, remember to:
•
Ensure sufficient ESD protection during the cleaning process
•
Remove any power from the device
•
When cleaning an enclosed system or peripheral use a dry cloth on the external casing
•
With single boards, use only a low power air brush or soft bristled paintbrush
•
Do not use detergents, aerosol sprays, solvents or abrasive sponges
